This is due to the distance between the print head and cutter mechanism and only happens if you are printing labels less than 3-inches in length and using a 1/6 inch tape feed.

The latest version of ProGAGE ISO has the latest Brother Label Printer drivers. For the older versions, actually it does. You'll need to install the Windows NT printer driver for the P-touch PC. Also, you'll need to download the following 2 ProGAGE1 zip files (you must be running ProGAGE1 v2 or higher) as described below:

This update will allow you to print P-touch calibration labels from ProGAGE1 within Windows NT. This update assumes that you already have ProGAGE1 v2 or higher installed and you already have the Windows NT P-touch printer driver installed.

Do the following:
1. Download and install the P-touch Windows NT printer driver.
2. Download and unzip the app.zip file to your C:\PGWIN2 folder.
3. Download and unzip the labels.zip file to your C:\PGWIN2\REPORTS folder.